CURING AGENT COMPONENT

DATE: 1st January 2003

1. Substance/Preparation & Company Identification

2. Composition/Information on Ingredients

3. Hazard Identification
- Harmful by inhalation and in contact with skin
- Causes burns
- May cause sensitization by skin contact

4. First Aid Measures
Note : TREAT LIKE CHEMICAL BURNS
- Skin Contact : Remove contaminated clothing immediately, Rinse affected skin with copious amounts of water
- Eye contact : Immediately flush eyes with running water for at least 15 minutes without interruption

Ingestion
- DO NOT induce vomiting
- Drink water to dilute
- Drink citrus fruit juice for neutralization

Inhalation
- Remove to fresh air immediately

5. Fire Fighting Measures
Suitable extinguishing Media : Dry powder, Carbon Dioxide, Water Spray
UNSUITABLE EXTINGUISHING MEDIA : Water Jet
Exposure HazaEcoscreed : Carbon Dioxide, Carbon Monoxide and Nitrogen Oxides may be formed
NB. Wear self contained breathing apparatus

6. Accidental Release Measures
Personal Precautions : Avoid skin and eyes contact. Provide sufficient ventilation during use
Environmental Precaution : Prevent from entering sewer system, surface water or soil
Methods of Cleaning : Soak up with absorbent material eg dry sand, vermiculite and dispose of as instructed

7. Handling & Storage
Handling : Use in well ventilated areas. Keep containers tightly closed when not in use
Storage : Avoid temperatures below 5ºC

8. Exposure Control & Personal Protection
Exposure control limits : Ensure good ventilation
Hand Protection : Protective gloves of PVC or rubber
Eye Protection : Full face safety goggles
Skin Protection : Rubber or plastic apron or complete overall

9. Physical & Chemical Properties
Melting Point / range : No data
Boiling Point / range : 200ºC
Oxidising Properties : N/A
Autoflamability : >250ºC
Solubility in water : Partly soluble
Vapour pressure : 0.4 h Pa @ 20ºC
Viscosity : 350 cps @ 20ºC
Appearance : Pale yellow liquid
Odour : Characteristic amine
Density : 1.020 g/cc
Flash point : 132ºC
Ignition : N/A
pH Value : 11

10. Stability & Reactivity
Thermal Decomposition : occurs at temperatures above 250ºC with the liberation of harmful gases
Conditions to Avoid : Frost, contact with reactive materials
Materials to Avoid : Acids
Hazardous Decomposition Gases : Carbon dioxide, Carbon Monoxide, Nitrogen Oxides, Ammonia

11. Toxicology Information
LD50 Acute oral toxicity : 3100mg/kg
Eye irritation tested : Corrosive
LD50 Skin irritation : Strong irritant

12. Ecological Information
Prevent contamination of soil, drains or surface water.No results from eco-toxicological test are available

13. Disposal Consideration
Burn in compliance with local and national regulations in a hazardous waste incinerator

14. Transport Information
RID/ADR : Class 8, 53/C, UN No:2735
IMDG-CODE : Class 8, UN No. 2735, PG:III
IATA : Class 8, UN/ID No 2735, PG:III
Flash Point : 132ºC
Proper Shipping name : Amines, Liquid, Corrosive N.O.S
Additional Information : Isophorone Diamine

15. Regulatory Information
Symbol : (C) Corrosive
Contains : Isophorone Diamine
R20/21/21 : Harmful by inhalation, in contact with skin, and if swallowed
R34 : Causes burns
R43 : May cause sensitization of the skin
S26 : In case of contact with the eyes rinse immediately with copious water and seek medical attention
S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection
S45 : In case of accident or if you feel unwell seek medical advice immediately

16. Other Information
Read in conjunction with appropriate BASE component Material Safety Data Sheet.

Top

BASE COMPONENT

DATE: 1st January 2003

1. Substance/Preparation & Company Identification

2. Composition/Information on Ingredients

3. Hazard Identification
- Irritating to eyes and skin
- Will burn but not classed as flammable
- May cause sensitization by skin contact

4. First Aid Measures
Note : TREAT LIKE CHEMICAL BURNS
- Skin Contact : DO NOT DELAY :Remove contaminated clothing immediately.
- Rinse affected skin with copious amounts of water. If persistant irritation seek medical advice
- Eye contact : DO NOT DELAY : Immediately flush eyes with running water for at least 15 minutes without interruption
- Obtain medical attention

Ingestion
- DO NOT induce vomiting. If Rapid 24 recovery does not occur then seek immediate medical attention

Inhalation
- Remove to fresh air immediately

5. Fire Fighting Measures
Suitable extinguishing Media : Dry powder, Carbon Dioxide, Water Spray
UNSUITABLE EXTINGUISHING MEDIA : Water Jet
Exposure HazaEcoscreed : Carbon Monoxide may be formed
NB. Wear self contained breathing apparatus

6. Accidental Release Measures
Personal Precautions : Avoid skin and eyes contact. Provide sufficient ventilation during use
Environmental Precaution : Prevent from entering sewer system, surface water or soil
Methods of Cleaning : Soak up with absorbent material eg dry sand, vermiculite and dispose of as instructed

7. Handling & Storage
Handling : Use in well ventilated areas. Keep containers tightly closed when not in use. Avoid contact with eyes and skin
Storage : Avoid temperatures below 5ºC

8. Exposure Control & Personal Protection
Exposure control limits : Ensure good ventilation
Hand Protection : Protective gloves of PVC or rubber
Eye Protection : Full face safety goggles
Skin Protection : Rubber or plastic apron or complete overall

9. Physical & Chemical Properties
Melting Point / range : No data
Boiling Point / range : 170ºC
Oxidising Properties : N/A
Autoflamability : N/A
Solubility in water : Partly soluble
Vapour pressure : No data
Viscosity : No data
Appearance : Pale straw
Odour : Slight
Density : 1.020 g/cc
Flash point : 132ºC
Ignition : N/A
pH Value : N/A

10. Stability & Reactivity
Thermal Decomposition : Not applicable under normal conditions
Conditions to Avoid : Frost, contact with reactive materials and temperatures above 95ºC
Materials to Avoid : Acids, Strong Oxidizing Agents, Caustic Soda
Hazardous Decomposition Gases : Carbon dioxide, Carbon Monoxide

11. Toxicology Information
LD50 Acute oral toxicity : >2000mg/kg
Eye irritation tested : Irritant
LD50 Skin irritation : Skin sensitizer

12. Ecological Information
Prevent contamination of soil, drains or surface water.No results from eco-toxicological test are available

13. Disposal Consideration
Recover or recycle if possible otherwise dispose of through licenced desposal contractor

14. Transport Information
RID/ADR : Class 9, 53/C, UN No:3082
IMDG-CODE : N/A Class 8, UN No. 2735, PG:III
IATA : N/A
Flash Point : >200ºC
Proper Shipping name : Environmentally hazardous substance
Additional Information : Isophorone Diamine

15. Regulatory Information
Symbol : (Xi) Irritant, N, dangerous to the environment
Contains : Bisphenol A - Epichloehydrin with ave MW >700, C12 - C14 aliphatic glycidylether
R20/21/21 : Harmful by inhalation, in contact with skin, and if swallowed
R34 : Causes burns
R53 : May cause long term adverse effects in aquatic environments
R43 : May cause sensitization of the skin
S24 : Avoid skin contact
S26 : In case of contact with the eyes rinse immediately with copious water and seek medical attention
S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection
S45 : In case of accident or if you feel unwell seek medical advice immediately
S61 : Avoid release into the enviroment

16. Other Information
Read in conjunction with appropriate BASE component Material Safety Data Sheet.

Top

ECOSCREED PRIMER AP1000

DATE: 1st January 2003

1. Substance/Preparation & Company Identification

2. Composition/Information on Ingredients

ECC Risk Classification : Aqua Ammonia C R.34 - 37

3. Hazard Identification
Inhalation : Inhalation of vapour or mist can cause headache, nausea or irritation of nose throat and lungs. Use mask or air purifying respirator
Eye Contact : Direct contact with material can cause slight irritation. Use chemical splash goggles Ensure eye wash facility is available at point of use.
Hand Protection : Wear gloves at all times when handling material

4. First Aid Measures
Personal Protection : Appropriate protective equipment must be worn when handling the spillage of this material.
Procedures : Keep spectators away. Floor may be slippery, use care to avoid falling. Contain spills immediately with inert materials eg Sand, earth, vermiculite.

KEEP SPILLS OUT OF DRAINS AND SEWERS OR OPEN BODIES OF WATER.

5. Handling & Storage
Handling : Use protective gear ie overalls, goggles and suitable gloves
Storage : Keep from freezing, material may coagulate. Minimum storage temperature is 1ºC. Maximum storage temperature is 49ºC.

6. Exposure Link Information

ECC Risk Classification : Aqua Ammonia C R.34 - 37

7. Physical & Chemical Properties
Appearance : Milky
Colour : White
State : Liquid
Odour : Ammonia Odour
pH : 9.0
Viscosity : 250 cps max
Specific Gravity : 1.0 1.2 gm/cc3
Vapoour Density : < 1 water
Melting Point : 0ºC / 32oF
Boiling Point : 100ºC / 212oF
Solubility in Water : Diluteable

8. Stability & Reactivity
Instability : This material is regarded as stable. However avoid temperatures above 177ºC which may produce onset of polymer decomposition.
Hazardous Decomposition Products : Thermal decomposition may yield acrylic monomers.
Incompatability : There are no known materials apart from those which may be reactive with Ammonia

9. Transport Information
Label : NOT REGULATED

10. Information Regulatory
EEC : This product satisfies all the requirements of the European Inventory of Existing Chemical Substances (EINECS)

EINECS Information

Top

ECOSCREED PU SEALER

DATE: 1st January 2003

1. Substance/Preparation & Company Identification

2. Composition/Information on Ingredients

3. Hazard Identification
Inhalation : Inhalation of vapour or mist can cause headache, nausea or irritation of nose throat and lungs. Use mask or air purifying respirator
Eye Contact : Direct contact with material can cause slight irritation. Use chemical splash goggles Ensure eye wash facility is available at point of use
Hand Protection : Wear gloves at all times when handling material

4. Accidental Release Measures
Personal Protection : Appropriate protective equipment must be worn when handling the spillage of this material
Procedures : Keep spectators away. Floor may be slippery, use care to avoid falling. Contain spills immediately with inert materials eg Sand, earth, vermiculite.

KEEP SPILLS OUT OF DRAINS AND SEWERS OR OPEN BODIES OF WATER.

5. Handling & Storage
Handling : Use protective gear ie overalls, goggles and suitable gloves
Storage : Keep from freezing, material may coagulate. Minimum storage temperature is 1ºC. Maximum storage temperature is 49ºC.

6. Exposure Link Information
This preparation is classed as an IRRITANT under the CHIP Regulations
R36/37/38 : Irritating to eyes, respiratory system, eyes
S26 : In case of contact with eyes rinse immediately with water and seek medical advice
S29 : Do not empty into drains
S41 : In case of fire or explosion do not breathe fumes

7. Physical & Chemical Properties
Appearance : Tan/amber
State : Liquid
Odour : Organic
pH : 8.5
Solubility : Fully water soluble
Viscosity : 250 cps max
Specific Gravity : 1.05 gm/cc3
Vapoour Pressure : 23mbar at 25ºC< 1 water
Boiling Point : 100ºC
Flash Point : Above 100ºC
Fire : Product will produce toxic fumes in fire

8. Stability & Reactivity
Instability : This material is regarded as stable. However avoid temperatures above 100ºC which may produce onset of organic decomposition.
Hazardous Decomposition Products : Thermal decomposition may yield toxic organic fumes
Incompatability : There are no known materials apart from those which may be reactive with Ammonia

9. Transport Information
Label : NOT CLASSIFIED AS DANGEROUS GOODS

10. Information Regulatory
This preparation is classed as an IRRITANT under the CHIP Regulations and must carry a Harmful symbol with the word IRRITANT and the following notations:-
R36/37/38 : Irritating to eyes, respiratory system, eyes
S26 : In case of contact with eyes rinse immediately with water and seek medical advice
S29 : Do not empty into drains
S41 : In case of fire or explosion do not breathe fumes

Top

ECOSCREED CEMENTITIOUS PRODUCTS
Ecoscreed - Ecoscreed 24 Cement - Ecoscreed 24 Leveller - Ecoscreed TA1,TA2 & TA RAPID Tile Adhesive - Ecoscreed TG1,2 & 3 Tile Grout

DATE: 1st January 2003

1. Substance/Preparation & Company Identification

2. Composition/Information on Ingredients

Composition: Dry pack powder products which contain less than 25% Portland cement mixed with organic additives and inorganic fillers not classified as hazardous

3. Hazard Identification (Hazard designation not classified under current regulations)
As with all cement products the ECOSCREED cementitious products are alkaline.
Inhalation : Dust will be harmful to respiratory tract. WEAR DUST MASK WHILST HANDLING MATERIALS
Eye Contact : Dust will irritate eyes and may cause alkali burns. WEAR PROTECTIVE GOGGLES
Skin Contact : May cause alkali burns or sensitization by skin contact. WEAR GLOVES AND OVERALLS

4. First Aid Measures
Note: TREAT LIKE CHEMICAL BURNS
Inhalation : Provide fresh air, seek medical advice if systems persist.
Eye Contact : Flush eyes with copious running water for several minutes. If symptoms severe seek medical attention.
Skin Contact : Remove contaminated clothing immediately and rinse affected skin with copious amounts of water

5. Fire Fighting Measures
Suitable extinguishing Media : Carbon Dioxide, Water Spray or jet

6. Accidental Release Measures
The materials are not dangerous if released
Personal Precautions : Avoid skin and eyes contact. Provide dust masks and sufficient ventilation / extraction during use
Environmental Precaution : Prevent from entering sewer system, surface water or soil
Methods of Cleaning : Collect spillages by mechanical means ie Vacuum cleaning to minimise dusting

7. Handling & Storage
Handling : Use in well ventilated areas. Avoid dust formation. Avoid contact with eyes and skin. Take appropriate care when moving 1 tonne pallets and lifting individual 25kg bags. Do not stack pallets more than two high
Storage : Keep in dry environment

8. Exposure Control & Personal Protection
Exposure control limits : Ensure good ventilation and minimize dusting during mixing procedures
Hand Protection : Protective gloves of PVC or rubber
Eye Protection : Full face positive displacement mask or safety goggles
Skin Protection : Complete overall and gloves
Respiratory Protection : DUST FILTER MASK OR POSITIVE AIR DISPLACEMENT MASK

9. Physical & Chemical Properties
Appearance : Powder
Colour : Grey or White depending on product
State : Solid
pH : 11.0
Relative Density : 1.200 to 1.800 gm/cc3
Solubility in Water : Sparingly soluble

10. Stability & Reactivity
Thermal Decomposition : Not applicable under normal conditions
Conditions to Avoid : Frost, contact with reactive materials ie Acids
Materials to Avoid : Acids, Strong Oxidizing Agents

11. TOXICOLOGY INFORMATION
Not applicable under current regulations

12. ECOLOGICAL INFORMATION
Prevent contamination of soil, drains or surface water. No results from eco-toxicological test are available

13. DISPOSAL CONSIDERATION
Dispose of all empty packaging and bags at locations authorized to accept construction waste Recycle pallets

14. TRANSPORT INFORMATION
Not classified as hazardous for transport purposed

15. REGULATORY INFORMATION
Products not subject to identification under the current EC Directives and regulations for Hazardous Materials

16. OTHER INFORMATION
- Treat as a cement product
- As with any 25kg packaged product care should be taken when moving and lifting bags and or pallets
- Do not stack pallets more than two levels high.

HPE Compound 2211 (Flowing Screed Binder)

1. Identification of the substance/preparation and company/undertaking

2. Composition/information on ingredients
Chemical properties (component substances)

calcium sulphate has not to be labelled according to EU-directives and the regulation on hazardous substances (Danger material regulation Germany)

3. hazards identification
Description of danger: not applicable
Special guidelines concerning dangers to humans and the environment: none

4. First-aid measures
no particularmeasures required
if substances has been swallowed: have patient drink plenty of water and consult doctor
if eye contact: wash out with plenty of water

5. fire-fighting measures
Suitable quenching agents: All suitable quenching agents, product itself is not combustible.
Unsuitable quenching agents: none
Particular danger caused by material, its combustion products or gases produced: none
Special protective equipment: none

6. Accidental release measures
Procedure for cleaning / absorption: absorb mechanically, take up in a dry state

7. Handling and storage
Handling: No particular measures required if used correctly
Storage: Store in a dry place, Storage class VCI 13 / non-combustible solid substance

8. Exposure controls/personal protection
Components with work-place related limits to be monitored