Skip to content
Ecoscreed

Helping you to save money year on year on your heating bills

Ecoscreed Polished Concrete Floors and Screeds

ECOSCREED Deco-Verde 

Ecoscreed Deco-Verde is a Code 6 M10 rapid drying eco-friendly flowing cementitious concrete floor screed designed to be a polished final decorative floor finish. The screed contains 100% replacement of natural sand by 4mm down recycled glass achieving a minimum compressive strength of > 30 N/mm2 or will be dry enough to receive floor coverings after 7 days at 20ºC.

Physical Data

ECOSCREED DECO-VERDE contains 1 part cementitious binder + 2 parts of 4mm down recycled glass and is designed to be a final finish polished concrete floor screed.

Colour : Grey / Green Polished: Dry grind only
Density : Wet 2100 kg/m3
Dry 1800 kg/m3
Typical Compressive Strength 28 days≥C30N/mm2
Typical Bending Strength 28 days≥F5N/mm2
Bond StrengthPrimed 2.1 N/mm2 (approximately)

Final Finish

Yes ; Ground Polished Concrete finish
WalkableApproximately 5 hours
Water DemandMax 16 % on total weight of mix
Aggregate Size 4mm down
Fire RatingClass A1

ECOSCREED Deco-Blanco

Ecoscreed Deco-Blanco is a Code 6 M10 quick drying eco-friendly flowing cementitious floor screed, ideal as a final decorative polished floor finish. This concrete screed contains 100% replacement of natural sand by 4mm down recycled glass achieving a minimum compressive strength of > 30 N/mm2 or will be dry enough to receive floor coverings after 7 days at 20ºC. The cementitious matrix is white and can be tinted to any colour required or any type of aggregate can be used although if recycled glass is not used then the thermal energy saving advantage of the screeding may be lost.

Physical Data

ECOSCREED DECO-BLANCO contains 1 part cementitious binder + 2 parts of 4mm down recycled glass and is designed to be a final finish polished concrete floor screed.

Colour : White MatrixPolished: Dry grind only
Density : Wet 2100 kg/m3
Dry 1800 kg/m3
Typical Compressive Strength 28 days≥C30N/mm2
Typical Bending Strength 28 days≥F5N/mm2
Bond StrengthPrimed 2.1 N/mm2 (approximately)

Final Finish

Yes ; Ground Polished Concrete finish
WalkableApproximately 5 hours
Water DemandMax 16 % on total weight of mix
Aggregate Size 4mm down
Fire RatingClass A1
 

Application Data

Minimum DepthUnbonded over UFH50 mm

Ensure the UFH pipe work is properly secured
Ensure a 10mm perimeter expansion strip is in place

Mix Ratio: 50kg binder + 75kg 4mm down glass.  Add ONLY sufficient water to produce a workable pourable pumpable flowing mix. DO NOT OVERWATER

Note

To achieve optimal results:

Concrete floor screed must be mixed and laid at the correct mix ratio, according to site conditions
Screeding drying times can be affected by site conditions, weather and installation.
Covering the screed surface can affect drying times.


Back to Top